ZHEJIANG LANG YOU PUMP CO.,LTD.

2007-10-31

Zhejiang langyou pump co., ltd is located at the southeast open city-Wenling. We specialize in pump as JET, CPM, DB, PK, FS, QY, QDX, WQ, WY nine series more than ninety kinds of products,Y series and sub.motor(single phase, three phase, aluminum & iron pump casing) Our company possesses automatic coil-embed machines by the computer, thread-coil machines, vacuum painting-immerged machines, 6 production assembling line for water pumps and advanced self-test production equipment so as to guarantee the products quality and improve the producing efficiency.And We will intensify development and introduction of new technologies and products, and boost their application These greatly to raising the quality and output of our products.much the same as developed countries,such as Europe and U.S.A. In the meantime, we also carried out extensive exchanges with the whole world,in the joint efforts to technology space.At present,more than 30 products have obtained production permit, ISO9001:2000 quality management system certificate and UL,CE, TUV, GS, ROHS certificate.
We have self-import & export powers.Annually, we services 500000 sets of pumps to international market. have been sold to more than 80 nations & regions such as Southeast Asia, Middle-East, Europe, South America, and Africa etc. Our products are of high quality. Win recognition from clients.
Quality is the only standard, Fine sincerity and credit is the foundation for the corporation. Our everlasting innovative Langyou people are honestly hope to cooperate with new and old friends with our advanced technology, modernized management, high quality products. Meanwhile, we trust our products will be creating benefit for you.

Contact Us

Address: WENXI INDUSTRIAL AREA , WENQIAO TOWN , WENLING CITY , ZHEJIANG PROVINCE
Zip: 317527
Tel: 86-576-86969918
Fax: 86-576-86968678
Person: Yuezhi Cai
E_mail;
Website: http://www.langyou.com

Clean pump series-Clean pumpLYPKS

2010-7-16 17:30:20

PERFORMANCE RANGE

Flow rate up to 50l/min(3.6m³/h)

Dynamic ead up to 90m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

pump	mode	power		qm3/h	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.7	3.0	3.3
single phase	three phase	kw	hp	l/min	0	5	10	15	20	25	30	35	45	50	55
LYPKSM-60	LYPKS-60	0.37	00.50		36	35	30	25	20	15	10	5
LYPKSM-65	LYPKS-65	0.50	0.70	hm	50		46	40	34.5	28.5	23	17	5
LYPKSM-70	LYPKS-70	0.60	0.85		60	55	50	45	40	35	30	25	15	10
LYPKSM-80	LYPKS-80	0.75	1		66	60	55.5	51	46.5	42	37.5	33	24	19.5	15

Self-priming JET/DP water pump series-Self-priming pump LYMKA

2010-7-16 17:30:20

performance data at n=2900l/min

single phase 230v/50hz	AMP(A)230V	INPUT POWER	OUT POWER KW	HP	CAPACITOR(UF)	L/MIN	10	20	30	35	40	50	60	65
							0.6	1.2	1.8	2.1	2.4	3.0	.3.6	3.9
LYMKA-250	2	0.46	0.24	0.33	12		21	20	16.5	16	214	10.5	7	5
3.9LYMKA-370	2.74	.0.61	0.37	0.5	15		32	30	26	24	22	17	10.5	7
LYMKA-550	3.53	0.79	0.55	0.75	18		43	39	36	32	27	21.5	14	9
LYMKA-750	4.13	0.95	0.75	1.0	20		51	47	42	38	34	25	17	12
LYMKA-1100	6.85	1.50	1.1	1.5	30		65	60	55	50	45	40	35	30
LYMKA-1500	7.95	1.70	1.5	2.0	40		75	70	65	55	50	50	45	40

Garden Pump-Garden pumpLYJSP

2010-7-16 17:30:20

PUMP INSTALLATION AND APPLICATIONS these pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump xomponents. they are extremely reliable,light,economical and simple to use ,finding many uses in domestic applications,in particular the automatic distribution of water from small and medium-size surge tanks,watering gardens.etc.these pumps shoule be installed in a covered area,protected against the weather.

PERFORMANCE the wide range of pumps in the LYJSP series satisfied the most varied requirments with features such as:-high heads with respect to power required；-flat operating and power absorption curves,giving moderate curve variations with respect to large variatios in delivery demand;-very low noise levels within the flied of applications;-high tolerance of the presence of entrained air in the fluid to be pumped;-suction capacity up to 9 meters.

STRUCTURAL CHARACTERISTICS pump body cast iron,stainless,plastic(ABS or NYLON); impeller ABS,brass ,noryl,stainless steel;motor closed ,externally ventilated;insulation class B(if class F reqired);protection class IP44 or IP54;duty continuously rated;mechanical seal stainless sttel/carbon-ceramices;shaft 45# steel (staibless steel if required);thermal protector;power feeding 230v/50hz,other voltage/frequency;can be avliable on requirement.

Self-priming JET/DP water pump series- Self-priming pumpLYZS

2010-7-16 17:30:20

LYZS series

pump centrifugal self-priming	pump body	techno-polymer
	impeller	techno-polymer
	mechanical seal	carbon/ceramic/stainless steel
motor	motor housing	aluminum/castion
single phase	shaft	carbon steel/stainless steel
heavy duty	isolation	class B/class F
continuous work	protection	IP44/IP54
	cooling	EXTERNAL VENTILATION

filter centrifugal pumps are designed for cleaning swiming pool.They are suitbale for transfer high volumes of water (not exceeding 40^oC)against low head.

Dual filter pump is designed fo cleaning LYZS swimming pool,It is an ideal tool to clean and remove dirt in private swimming pools.It consists of a LYZS water pump with a filter jarl, a hand lever,a chuck,a hydraullic pipe and a pusher ,It has the merits of easy portable ,simple operate,excellent performance,and sound price,After filtering ,the good quality water can be used epeatedly and doesn't need changing constantly.

performance specifications

type	power		q.max	h.max	suct.max	speed	size	A	B	H	KG
	HP	KW
LYZS-370	0.5	0.37	190	12			50	525	215	285	7.5
LYZS-550	0.75	0.55	200	14			50	525	215	285	9
LYZS-750	1	0.75	220	16	9	2850	50	525	215	285	10.5
LYZS-1100	1.5	1.1	330	18			50	610	225	290	17.5
LYZS-1500	2	1.5	440	19			50	610	225	290	19.0
LYZ-2200	3	2.2	510	20			50	610	225	290	20.5

Self-priming JET/DP water pump series-Self priming pump AQUALYJETDP(AUJDW)

2010-7-16 17:30:20

The AQUALYJETDP and AUJDW series pumps are regards as one of the best surface pumps for deep well water priming,it consists of two pumps connected in series .one is ejector pump and the other is centrifugal pump.The ejector pump is lowered in a 4" well and connected to the centrifugal pump body by two pipes.For working principle.please refer to the pipe connection below.

Usually,these pumps are used with a set of TAND-auto system include the tand,the pressure gauge,the pressure switch,the foot vavle,etc.,The tand-austo system is another most significant merit of this pump,which make the pumps more convenient for using.

These pumps are suitable for pumping clean water and chemically nonaggressive fluid.They are extremely reliable,economical to use in domestic applications,To ensure adequate counter-pressure,It is always better to install a fool valive with a filter on the suction end.These pumps should be installed in a covered area,protected against the weather.

PUMP centrifugal	pump body	cast iron
	impeller	techno-polymer/brass
	mechanical seal	carbon/ceramic /stanless steel
motor	motor housing	aluminum
single phase	shaft	carbon steel /stainless steel
heavy duty	isolation	class b/class f
continuous work	protection	ip44/ip54
	cooling	external ventilation

Self-priming JET/DP water pump series-Self priming pump LYJET-M

2010-7-16 17:30:21

Those pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components.

TYPE

POWER

Q.MAX

L/MIN

H.MAX

SUCT.MAX

SPEED

R.P.M

SIZE

LYJET-102M

0.75

2850

1"X1"

PUMP	PUMP BODY	CAST IRON
CENTRIFUGAL	IMPELLER	TECHO-POLYMER(P.P.O)
SELF-PRIMING	DIFFUSOR/JET PIPE	TECHO-POLYMER(P.P.O
	MECHANICAL SEAL	CARTON/CERAMIC/STAINLESS STEEL
MOTOR	MOTOR HOUSING	ALUMINUM
SINGLE PHASE	SHAFT	CARBON STEEL/STAINLESS STEEL
HEAVY DUTY	ISOKATION	CLASS B/CLASS F
CONTINUOUS WORK	PROTECTION	IP 44/IP 54
	COOLING	EXTERNAL VENTILATION

Self-priming JET/DP water pump series-Self-priming pump LYJET-B

2010-7-16 17:30:21

PERFORMANCE RANGE

Fluid up tp 80l/min(4.8m³/h)

Dynamic head up to 70m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up tp +40^oC

Maximum ambient temperature +40^oC

A new and improved self-priming pump design.

increase hydraulic efficiency,to current standards

PUMP	MODEL	POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.28	2.7	3.6	4.2	4.8
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	5	10	15	20	25	30	35	38	45	60	70	80
LYJETm-60B	LYJET-60B	0.4	0.50		35	34	26.5	20	15	11	8	6	5
LYJETm-80B	LYJET-80B	0.55	0.70	HM	40	38	32	28	21.5	18	15	13	11.5	10
LYJETm-100B	LYJET-100B	0.75	1		50	46	40	35	30.5	27	32.5	21	19	17	15
LYJETm-120B	LYJET-120B	1.1	1.5		64	-	60	54	49	44	40	36	34.5	31	26	25
LYJETm-140B	LYJET-140B	1.5	2		70	-	71	65	61	57	53	49.5	48	44	38.5	36	35

Self-priming JET/DP water pump series-Self-priming pumpLYJET-A

2010-7-16 17:30:21

PERFORMANCE RANGE

Fluid up tp 80l/min(4.8m³/h)

Dynamic head up to 70m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up tp +40^oC

Maximum ambient temperature +40^oC

A new and improved self-priming pump design.

increase hydraulic efficiency,to current standards.

pump	model	power		qm3/h	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.28	2.7	3.6	4.2	4.5
single phase	three phase	kw	hp	l/min	0	5	10	15	20	25	30	35	38	45	60	75	80
LYJETm-60A	LYJET-60A	0.4	0.50		35	34	26.5	20	15	11	8	6	5
LYJETm-80A	LYJET-80A	0.55	0.70	hm	40	38	32	28	21.5	18	15	13	11.5	10
LYJETm-100A	LYJET-100A	0.75	1		50	46	40	35	30.5	27	32.5	21	19	17	16
LYJETm-120A	LYJET-120A	1.1	1.5		64	-	60	54	49	44	40	36	34.5	31	26	25
LYJETm-140A	LYJET-140A	1.5	2		70	-	70	65	61	57	53	49.5	48	44	38.5	36.35

Self-priming JET/DP water pump series-Self-priming pump LYJET-S

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 60l/min

Dynamic head up to 47m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +40oC

Maximum ambient temperature +40oC

A new and improved self-priming pump design.

increased hydraulic effiency,to current standard

PUMP	MODEL	POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.28	2.7	3.6
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	5	10	15	20	25	30	35	38	45	60
LYJET-60S	LYJET-60S	0.4	0.50	HM	35	34	26.5	20	15	11	8	6	5
LYJET-80S	LYJET-80S	0.55	0.75		40	28	32	28	21.5	18	15	13	11.5	10
LYJST-100S	LYJET-100S	0.75	1		50	46	40	35	30.5	27	22.5	21	19	17	15

Self-priming JET/DP water pump series-Self-priming pump LYJET-L

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 60l/min

Dynamic head up yo 80m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +40oC

Maximum ambient temperature +40oC

A new and improved self-priming pump design,increased hydrallic efficiency,to current standards.

LYJETm-60L

PUMP	MODEL	POWER		QM3/H	0	0.3	0.9	0.9	1.2	1.5	1.8	2.1	2.28	2.7	3.6
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	5	10	15	20	25	30	35	38	45	60
LYJETm-60L	LYJET-60L	0.4	0.50	HM	35	34	26.5	20	15	11	8	6	5
LYJETm-80L	LYJET-80L	0.55	0.70		40	38	32	28	21.5	18	15	13	11.5	10
LYJETm-100L	LYJET-100L	0.75	1		50	46	40	35	30.5	27	22.5	21	19	17	15

Centrifugal pump series-Centrifugal pumpLY2XSCM

2010-7-16 17:30:21

Main features

Pump body Cast Iron

Impeller Brass (noryl if required)

Motor Closed,externally ventilated

Insulation class B

Protection class IP44

Duty continuously rated

Mechanical seal Ø16 ceramic

steatite/metalized carbon

TYPE	POWER		AMPERE 220V-1 50HZ	UF	R.P.M	Q.MAX(L/MIN)	H.MAX(M)	S.HEAD(M)	TEMP MAS	EMP MAX	N.W(KG)
LY2XSCM-52	1.5	1.1	6.8	30	2850	140	42	9	80^OC	40^OC	22.5
LY2XSCM-52	2	1.5	9.5	30	2850	156	50	9	80^OC	40^OC	24
LY2XSCM-60	3	2.2	12.5	45	2850	180	60	9	80^OC	40^OC	28
LY2XSCM-68	4	3	18.2	60	2850	200	68	9	80^OC	40^OC	32

Centrifugal pump series-Centrifugal pumpLYFS

2010-7-16 17:30:21

Operating conditions

Liquid temperature up to 60^oC

Ambient temperature up to 40^oC

Total suction lift up 8m

Continuous duty

Motor

Two-pole induction motor

(n=2850r.p.m)

Insulation class B

Protection IP44

Protected by thermal protector

Material

Pump body Stainless stell

Impeller Stainless stell

Motor housing Stainless steel

Shaft Stainless stell

Mechanical seal Carbon/Ceramic

SINGLE PHASE230V50HZ		POWER	SUCTION HEAD(M)	CAPACITY Q
	KW	HP		L/MIN	20	40	60	80	100	120	140	160	180	200	220	240	260
				M3/H	1.2	2.4	3.6	4.8	6.0	7.2	8.4	9.6	10.8	12	13.2	14.4	15.6
1.5LYFS-250	0.25	0.33	8	HEAD M	9.5	8.5	7.5	6.5
LYFS-370	0.37	0.560	8		12.5	11.5	10	9
LYFS-370A	0.37	0.50	8		16	15	13.5	13	11.5	10
LYFS-550	0.55	0.75	8		19	18	17	16	15	14
LYFS-750	0.75	1.00	8		25	24	22.5	22	20	19

Centrifugal pump series-Centrifugal pump LYDK

2010-7-16 17:30:21

PERFORMANCE RNGE

Flow rate up to 550l/min(33m³/h)

Dynamic head up to 20m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	1.8	2.4	3.3	6	9	12	18	24	30
single phase	three phase	kw	hp	l/min	0	30	40	55	100	150	200	300	400	500
LYDKm-14	LYDK-14	0.37	0.5		15	13	11.5	6
LYDKm1--24	LYDK1-24	0.55	0.75	hm	19	18	17.5	16.5	13.5	10
LYDKm1.5-20	LYDK1.5-20	0.75	1.0		19	18	17.8	17.5	16.5	15	12.5
LYDKm2-20	LYDK2-20	1.5	2.0		20	-	-	-	19	18	16.8	15	12.9

Centrifugal pump series-Centrifugal pumpLYPU

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 700l/min(42m³/h)

Dynamic head up to 24m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	1.2	3	6	9	15	18	24	30	42
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	20	50	100	150	200	300	400	500	700
LYPU201	PU201	0.37	0.5		15	14	10	5
LYPU203	PU203	0.55	0.75	HM	15	14	13	9.5	7
LYPU204	PU204	0.75	1.0		16	15	14.5	12.5	10	7.5
LYPU205	PU205	1.5	2.0		20	-	19.5	18.5	17.5	15.5	14.5	11.5	8
LYPU207	PU207	2.2	3		24	-	-	22	21.5	20.5	18.5	16.5	14.5	9

Centrifugal pump series-Centrifugal pumpLYMHFm

2010-7-16 17:30:21

these pumps are suitable for handling clean water and fluids which are not chemically aggressive to the pump components.

TYPE			POWER	Qm3/h	12	18	24	30	36	42	48	54	60	66	72	84	96	102	108	120	132
SINGLE PHASE	THREE [HASE	KW	HP	L/MIN	200	300	400	500	600	700	800	900	1000	1100	1200	1400	1600	1700	1800	2000	2200
LYMHFm4	LYMHF4	0.75	1		9.3	8.7	8	7	6	4.7	3
LYMHFm6C	LYMHF6C	1.1	1.5		11.7	11.3	10.7	10.2	9.2	8	6.7	5	3
LYMHFm6B	LYMHF6B	1.5	2	H(M)	14.5	14	13.5	12.8	12	11	9.7	8.2	6..7	5
--	LYMHF6A	2.2	3		18.1	17.8	17.2	16.8	16	15	13.8	12.2	10.5	8.3	6
LYMHFm6CR	LYMHF6CR	1.1	1.5		11.7	11.3	10.7	9.2	8	6.7	5
LYMHFm6BR	LYMHF6BR	1.5	2		18.1	17.8	17.2	16.8	15	13.8	12.2	10.5	8.3	6
--	LYMHF6AR	2.2	3		21	20.7	20	19.5	18.8	17.8	16.8	15	13.5	11.2	9
LYMHFm8B	LYMHF8B	3	4		24	23.5	23	22.5	21.8	20.8	19.5	18.3	15	13
--	LYMHF8A	4	5.5		--	--	15.5	5.4	15.3	15.2	15	14.5	14	13	12	9	4.8	2
LYMHFm20B	LYMHF20B	3	4		--	--	18.5	18.4	18.3	18.2	18	17.5	17	16.2	15.2	12	7.8	5	2
--	LYMHF20A	4	5.5		--	--	--	--	18	18	18	18	18	17.5	17	16.5	15.5	14.5	13
--	LYMHF30B	5.5	7.5		--	--	--	--	23	23	23	23	23	22.5	22.5	22.5	22	21.5	21	19.5	18
--	LYMHF30B	7.5	10

Centrifugal pump series-Centrifugal pumpLYMHFm

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 160l/min

Dynamic head up to 50m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

type		POWER
single phase	three phase	KW	HP	Qm3/h	3	6	9	12	15	18	21	24	30	36
LYMHFm50B	LYMHF50B	0.37	0.50	L/min	50	100	150	200	250	300	350	400	500	600
LYMHFm50A	LYMHF50A	0.55	0.75		8.5	8.2	7.5	6.3	4.9	2.6
LYMHFm51B	LYMHF51B	0.60	0.85	H(m）	11.5	11.2	10.6	9.6	8	6
LYMHFm51A	LYMHF51A	0.75	1		17.2	16	14	11.5	9	5.4
LYMHFm60	LYMHF60	1.1	1.5		20.2	19	17	14.5	11.6	8.4
LYMHFm70B	LYMHF70B	1.5	2		28	26.5	24.5	22	18.5	15
--	LYMHF70A	2.2	3		32	30.5	28.5	26	22.5	19
LYMHFm5C	LYMHF5C	0.60	0.85		38	36.5	34.5	32	28.5	25
LYMHFm5B	LYMHF5B	0.75	1		-	12	11.7	11	10.2	9.2	8	6.5
LYMHFm5A	LYMHF5A	1.1	1.5		-	13.2	13	12.5	11.6	10.5	9.1	6.5	3
LYMHFm5BM	LYMHF5BM	1.1	1.5		-	19.2	19	18	17	16	14	12	7.5
LYMHFm5AM	LYMHF5AM	1.5	2		-22	21.5	21	20	18.5	16.6	14.5	10

Centrifugal pump series-Centrifugal pumpLYNHFm

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 1200l/min(72m³/h)

Dynamic head up to 22m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

TYPE			POWER	QM3/H	6	9	12	15	18	21	24	30	36	42	48	54	60	66	72
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	100	150	200	250	300	350	400	500	600	700	800	900	1000	1100	1200
LYNHFm-128B	LYNHF-128B	0.60	0.85	hm	12	11.7	11	10.2	9.2	8	8.5
LYNHFM-128A	LYNHF-128A	0.75	1		13.2	13	12.5	11.6	10.5	9.2	8	5
LYNHFM-128AR	LYNHF-128AR	1.1	1.5		13.8	13.5	13.2	12.6	11.5	10.5	9.2	6.5	3
LYNHF-129B	LYNHF-129B	1.1	1.5		19.2	19	18	17	16	14	12	7.5
LYNHF-129A	LYNHF-130C	1.5	2		22	21.5	21	20	18.5	16.6	14.5	10
LYNHFM-130C	LYNHF-130B	1.1	1.5		-	-	11.7	11.5	11.3	11.1	10.7	10.2	9.1	8	6.7	5	3
LYNHFM-130B	LYNHF-130A	1.5	2		-	-	14.5	14.2	14	13.7	13.5	13.2	12	11	9.7	8.2	6.7	5
--	LYNHF-130A	2.2	3		-	-	18.1	18	17.8	17.5	17.2	16.8	16	15	13.8	12.2	10.5	8.3	6

Centrifugal pump series-Centrifugal pumpLYCM-20

2010-7-16 17:30:21

CM-20 series centrifugal pumps are single stage,high eficient electric pumps,consisted of a miniature motor and a single impellercentrifugal pu,p.They have a good performance in big capacity and high head.

They are widely used in well-pumping.water supplying,decanting,mixing and irrigating for civil,industry and agriculture,etc.

TYPE

POWER

Q.MAX

H.MAX

SUT.MAX

SPEED

r.p.m

size

package

dimension

LYCM-20

0.75

260

2850

40X30

310

175

225

14.0

Centrifugal pump series-Centrifugal pumpLYDTM(CM)

2010-7-16 17:30:21

THESE PUMPS ARE USED FOR CLEAN WATER

type

power

q.max

h.max

suct.max

speed r.p.m

size

packing

dimensions

LYDTM-20A

1.5

560

2850

40X40

355

210

270

18.0

Centrifugal pump series-Centrifugal pumpLYDTm(GAm)

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 250l/min(15m³/h)

Dynamic head up to 20m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	3.0	4.5	6.0	7.5	9.0	10.5	12.0	12.6	14.4
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	50	75	100	125	150	175	200	210	240
LYDTM-60	LYGAM-60	0.6	0.85		12	10.5	9	8	6.5	5	4	3
LYDTM-75	LYGAM-75	0.75	1.0	HM	15	13.5	11.5	9	7.5	6	5	3.5
LYDTM-110	LYGAM-110	1.1	1.5		16	14.5	12.5	11.5	9.5	8	6	4	3
LYDTM-150	LYGAM-150	1.5	2		20	18	16	15	14	12	9	7	5	3

Centrifugal pump series-Centrifugal pumpLYCPM-B

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 160l/min

Dynamic head up to 63m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

TYPE		POWER		QM3/H	0.6	1.2	1.8	2.4	3	3.6	4.2	4.8	5.4	6.0	6.6	7.2	7.8	8.4	9.0	9.6
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	10	20	30	40	50	60	70	80	90	100	110	120	130	140	150	160
LYCPM-100B	LYCP-100B	0.25	0.33		15	14	12.5	11	9	7
LYCPM-130B	LYCP-130B	0.37	0.50		22	21	20	19	18	17	15.5	14
LYCPM-132B	LYCP-132B	0.45	0.60		-	18	17	16	15	13.5	12	10.5	9	7
LYCPM-146B	LYCP-146B	0.55	0.75	HM	-	22	21.5	21	20	19	18	17	16	14	12	9
LYCPM-150B	LYCP-150B	0.60	0.85		32		31	29.5	28.5	27	25	23	19
LYCPM-152B	LYCP-152B	0.75	1		-	29	28.5	28	27.5	26.5	26	24.5	23	21	18	15
LYCPM-158B	LYCP-158B	0.75	1		34	33.5	33	32.5	31.5	30	28.5	27	25
LYCPM-170B	LYCP-170B	1.1	1.5		-	-	38	37	36	35	33.5	32	30	29	28	26.5	25	23	21	19
LYCPM-170MB	LYCP-170MB	1.1	1.5		-	-	35	34.5	33.5	33	32	31	30	29	28	26.5	25	23	21	19
LYCPM-190B	LYCP-190B	1.5	2		-	-	46	44.85	43	41.5	40	38	36	34.5	32.5	30.5	28	26
LYCPM-200B	LYCP-200B	2.2	3		-	-	55	54.5	53.5	52	51	49.5	48		46	44.5	42.5	40.5	38.5	36

Centrifugal pump series-Centrifugal pump LYCPM-A

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 160l/min

Dynamic head up to 50m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

TYPE		POWER		QM3/H	0.6	1.2	1.8	2.4	3	3.6	4.2	4.8	5.4	6.0	6.6	7.2	7.8	8.4	9.0	9.5
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	10	20	30	40	50	60	70	80	90	100	110	120	130	140	150	160
LYCPM-100A	LYCP-100A	0.25	0.33		15	14	12.5	11	9	7
LYCPM-130A	LYCP-130A	0.37	0.50		22	21	20	19	18	17	15.5	14
LYCPM-132A	LYCP-132A	0.45	0.60		-	18	17	16	15	13.5	12	10.5	9	7
LYCPM-146A	LYCP-146A	0.55	0.75	HM	-	22	21.5	21	20	19	18	17	16	14	12	9
LYCPM-150A	LYCP-150A	0.60	0.85		32	31	29.5	28.5	27	25	23	19
LYCPM-152A	LYCP-152A	0.75	1		-	29	28.5	28	27.5	26.5	26	24.5	23	21	18	15
LYCPM-158A	LYCP-158A	0.75	1		34	33.5	33	32.5	31.5	30	28.5	27	25
LYCPM-170A	LYCP-170A	1.1	1.5		-	-	38	37	36	35	33.5	32	30	27.5	25	22
LYCPM-170MA	LYCP-170MA	1.1	1.5		-	-	35	34.5	33.5	33	32	31	30	29	28	26.5	25	23	21	19
LYCPM-190A	LYCP-190A	1.5	2		-	-	46	44.5	43	41.5	40	38	36	34.5	32.5	30.5	28	26
LYCPM-200A	LYCP-200A	2.2	3		-	-	55	54.5	53.5	52	51	49.5	48	46	44.5	42.5	40.5	38.5	36

Clean pump series-Clean pumpLYPS

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 40l/min(2.4m³/h)

Dynamic head up to 28m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	2.1	2.4
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	0	5	10	15	20	25	35	40
LYPSM-126	LYPS-126	0.25	0.33	HM	28	26	22.5	19	15.5	12	5
LYPSM-130	LYPS-130	0.25	0.33		28	26	22.5	19	15.5	12	5

Clean pump series-Clean pumpLYGP

2010-7-16 17:30:21

PERFORMANCE RANGE

Flow rate up to 45l/min(2.8m³/h)

Dynamic head up to 45m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	1.8	1.92	2.1	2.4
single phase	three phase	KW	HP	L/MIN	0	5	10	15	20	25	30	32	35	40
LYGPM-125	LYGP-125	0.30	0.50	HM	30	28	24	20	16	11.5	7.5	5
LYGPM-250	LYGP-250	0.50	0.70		45	40	35	30.5	25.5	20.5	16	14	11	6

Clean pump series-Clean pumpLYIDB

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic head up to 80m

OPERATING LIMITS

Suction lift up to 8m

Fluid temperaue up to +60^oC

Maximum ambient temperature +40^oC

PUMP	MODEL	POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.7	3.3	4.2
SINGLE PHASE	THREE PHASE	0.33	0.50	L/MIN	0	5	10	15	20	25	30	35	45	50	75
LYIDBM-35	LYPM-45	0.55	0.75		35	34	29	24	19.5	15	10	5
LYIDBM-40	LYPM-60	0.75	1		50	45	40.5	36	31	26.5	22	17	8
LYIDBM-50	LYPM-80	1.1	1.5		60	55	50.5	46	41.5	37	32.5	25	90	10
LYIDBM-60	LYPM-100				80	75	70	65	60	55	50	35	30	25	10

Clean pump series-Clean pump LYDB

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic head up to 65m

OPERATING LIMITS

Suction lift up to 8m

Fluid temperaue up to +60^oC

Maximum ambient temperature +40^oC

pump	model	power		Qm3/h	0	0.3	0.6	0.9	1.2	1.5	1.92	2.16	2.4	2.7	3.6	4.2	4.8
single phase	three phase	kw	hp	l/min	0	5	10	15	20	25	32	36	40	45	60	70	80
LYDBM-125A	LYDB-125A	0.25	0.33		26	25	21	17.5	14	10	5
LYDBM-330A	LYDB-330A	0.37	0.50	HM	38	35	30	25	20.5	15.5	9	5
LYDBM-550A	LYDB-550A	0.50	0.75		50	45	40	35	30	25	15	18	14	10	5
LYDBM-750A	LYDB-750A	0.75	1		60	-	55	49.5	44	39	31	27	22.5	17

Clean pump series-Clean pumpLYST(BA3)(CP)

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic ead up to 70m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

TYPE		POWER		QM3/H	0	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.7	3.0	3.3
SINGLE PHASE	THREE PHASE	KW	HP	l/min	0	5	10	15	20	25	30	35	45	50	55
LYSTM-60	LYLQ-60	0.37	0.5		36	35	30	25	20	15	10	5
LYSTM-65	LYLQ-65	0.50	0.70	h/m	50		46	40	34.5	28.5	23	17	5
LYSTM-70	LYLQ-70	0.60	0.85		60	55	50	45	40	35	30	25	15	10
LYSTM-80	LYLQ-80	0.75	1		66	60	55.5	51	48.5	42	37.5	33	24	19.5	15
LYBA3	-	0.25	0.33		40	35	34	30	23	19	14	10	5
LYCP-45	-	0.25	0.33		40	35	30	23	19	14	10	5
LYCP-130	-	0.37	0.5		45	40	35	34	30	23	19	14	10	5

Clean pump series-Clean pumpLYKF

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic ead up to 80m

OPERATING LIMITS

Suction lift up to 8m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

type		power		Qm3/h	0.3	0.6	0.9	1.2	1.5	1.8	2.4	2.7	3.0	3.6	4.2	4.8	5.4
single phase	three phase	kw	hp	l/min	5	10	15	20	25	30	35	41	50	60	70	80	90
LYKFM-1	LYKF-0/1	0.37	0.50		38	33.5	29	24	19.4	15	10	5
LYKFM-1.5	LYKF-0/1.5	0.50	0.70	H(m)	50	45.5	40.5	36	31	27	22	17	8
LYKFM-2	LYKF-0/2	0.60	0.85		62	57	52	47	42	37	32	27	18
LYKFM-3	LYKF-0/3	0.75	1		66	61	56	51	46	36.5	31	31	22
LYKFM-4	LYKF-0/4	0.75	1		82	71	60	49	38	27	17	5
LYKFM-5	LYKF-0/5	1.1	1.5		80	75	70	65	60	55	50	45	35	25	15
LYKFM-6	LYKF-0/6	1.5	2		86	81	76	71	65.5	60	55	50	40	30	20	10
--	LYKF-0-7	2.2	3		95	90	85	75	70	65	60	50	40	30	20	10

Clean pump series-Clean pump LYPKM(MKP)(QB)

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic head up to 80m

OPERATING LIMITS

Suction lift up to 8m

Fluid temperature up to +60^oC

Maimum ambient temperature +40^oC

type		power		Qm3/h	0.3	0.6	0.9	1.2	1.5	1.8	2.4	2.7	3.0	3.6	4.2	4.8	5.4
SINGLE PHASE	THREE PHASE	KW	HP	L/MIN	5	10	115	20	25	30	35	40	50	60	70	80	90
LYPKM-60	LYQB-60	0.37	0.50.		38	33.5	29	24	19.5	15	10	5
LYPKM-65	LYQB-65	0.5	0.70	H(M)	50	45.5	40.50	36	31	27	22	17	8
LYPKM-70	LYQB-70	0.6	0.85		62	57	52	47	42	37	32	27	18
LYPKM-80	LYQB-80	0.75	1		66	61	56	51	46	41	36.5	31	22
LYPKM-90	LYQB-90	0.75	1		82	71	60	49	38	27	17	5
LYPKM-100	LYQB-100	1.1	1.5		80	75	70	65	60	55	50	45	35	25	15
LYPKM-200	LYQB-200	1.5	2		86	81	76	71	65.5	60	55	50	40	30	20	10
--	LYQB-300	2.2	3		95	90	85	80	75	70	65	60	50	40	30	20	10

Boosting pump-Boosting pumpLYBP-WB

2010-7-16 17:30:22

MATERIAL AND WORKING LIMITS

PUMP BODY:BRASS

IMPELLER；brass

MOTOR HOUSING :ALUMINUM OR STAINLESS STEEL

FRONT COVER:BRASS

MECHANICAL SEAL:STAINLESS STEEL

SHAFT:45#STEEL OR STAINLESS STEEL

BEARING:SKF/NTN/NSK/CHINA

INSULATION:CLASS FPROTECTION CLASS:IP54

Boosting pump- Boosting pumpLYBP-WB

2010-7-16 17:30:22

this series of pump is a new generation of house hould inline auto-boosting pump,which has been developed and modifed dor may years,unique full auto-control apparatus helps really starting and stopped the pump at will.

the product adopts aluminum alloy shell,copper(stainless steel)body,a same shaft commonly used by both motor and pump.it has the characteristics of quality material,compact structure,small volume,low noise,artistic outline and corrosion protection,it is widely suitable for boosting of family water heater,heating water circulation,etc.

MODEL	INPUT POWER	INLET/OUTLET	MAX.FLOW	MAX.HEAD	G.W	PACKING DIMENSION(MM)
12WG-8	40	1/2"X1/2"
15WG-10	60	3/4"X3//4"
15WZ-10	90	3/4"X3/4"
15WR-10	90	3/4"X3/4"
15WB-10	80	3/4"X3/4"
15WB-14	120	3/4"X3/4"
18WG-18	260	3/4"X3/4"
18WZ-18	260	3/4"X3/4"

Self-priming JET/DP water pump series-Self-priming pump LYJET-W

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 75l/min

Dynamic head up to 70m

OPERATING LIMITS

Suction lift up to 9m

Fluid temperature up to +40oC

Maximum ambient temperature +40oC

A new ans improved seld-priming pump design.

increased hydraullic effiency,to current standard

pump	model	power	qm3/h	0	0.3	0.6	0.72	0.9	1.2	1.5	1.8	2.1	2.4	2.7	3.0	3.3	3.6	4.2
single phase	three phase	kw/hp	l/min	0	5	10	12	15	20	25	30	35	40	45	50	55	60	70
LYJETM-40W	LYJET-40W	0.37/0.50	HM	32	31	25	23	20	15.5	12	9	7	5
LYJETM-60W	LYJETM-60W	0.50/0.70		42	-	-	40	36	31	25.5	21.5	18.5	15.5	13.5	12
LYJETM-80W	LYJETM-80W	0.60/0.85		46	-	-	-	10	48	42	36.5	32	28	25	22	20
LYJETM-100W	LYJETM-100W	0.75/1		60	-	-	-	10	56	49	43	38.5	34	30.5	28	26.5	25
LYJETM-110W	LYJETM-110W	0.90/1.25		64	-	62	59	55	49	43	38	34	30	27	24	22	20
LYJETM-120W	LYJETM-120W	1.1/1.5		70	-	-	67	63	57	51	45.5	41	37	33	29	26.5	24	20
LYJETM-140W	LYJETM-140W	1.5/2

Self-priming JET/DP water pump series-Surf circulating pump LYMS

2010-7-16 17:30:22

FEATURES:

This pumps adopts inner air cooling design,enables heat dispersion performance of the motor to be more suoerior,thereby extends service life of motor.The motor is equipped with thermal protector inside,which ensures motor notto be damanged,Use manual press type pneumatic plant to coutrol pump switch,which effectively prevents electric leakage caused by water entering switch or high humidity of air,it has strong safety performance,pump body adopts acid and alkali proff,corrosion proof material,water utilization is more sanitary.Motor shaft is isolated form liquid thoroughly,which prevents rust from influencing seal performance,the greatest merit is that water is absolutely free of elctricity even the motor leaks electricity,thereby it ensures safer operation.

MAIN USE:

This pump is especially suitable for surfmassage in shower house and surfauxiliary of footbath massage chair,since flow of this pump is extraordinarily large,it is also suitable for water supply of pool,irrigation of farmland,delivery of beverage,chemical engineering and petroeulm pipe line auxiliaries.

Self-priming JET/DP water pump series-Self priming pump AQUALYJETDP-505A/750A

2010-7-16 17:30:22

The AQUALYJETDP-505A/750A pumps are regards as one of the best surface pumps for deep well water priming,with two back to back impeller to gain good performance in suction and head putput. it consists of two pumps connected in series .one is ejector pump and the other is centrifugal pump.The ejector pump is lowered in a 4" well and connected to the centrifugal pump body by two pipes.For working principle.please refer to the pipe connection below.

Usually,these pumps are used with a set of TANK-auto system include the tank,the pressure gauge,the pressure switch,the foot vavle,etc.,The tand-austo system is another most significant merit of this pump,which make the pumps more convenient for using.

Centrifugal pump series-Centrifugal pumpLYSCM

2010-7-16 17:30:22

PERFORMANCE RANGE

Flow rate up to 160l/min

Dynamic head up to 36m

OPERATING LIMITS

Suction lift up to 7m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

Centrifugal pump series-Centrifugal pumpLYCM-20

2010-7-16 17:30:22

They are widely used in well-pumping.water supplying,decanting,mixing and irrigating for civil,industry and agriculture,etc.

Clean pump series-Clean pumpLYPW

2010-7-16 17:30:22

These pumps are used for family .

Submersible pump-Submersible pump LYQSB

2010-7-16 17:30:22

these pumps adopt plastic pump head

Garden Pump-Fountain pump LY-FP

2010-7-16 17:30:23

MODEL	POWER	H.MAX	Q.MAX	SUCTION	INCH	CABLE
LYFP38	38	2.2	1500	3	1/2	HO5RN-F 3G0.75MM3X1.2
LYFP55	55	2.5	1800	3	1/2	HO5RN-F 3G0.75MM3X1.2
LYFP75-1	75	5	4000	3	1	HO5RN-F 3G0.75MM3X1.2
LYPF110-1	110	5.5	4800	3	1	HO5RN-F 3G0.75MM3X1.2

Clean pump series-Clean pump LYCK

2010-7-16 17:30:23

PERFORMANCE RANGE

Flow rate up to 60l/min(3.6m³/h)

Dynamic ead up to 80m

OPERATING LIMITS

Suction lift up to 8m

Fluid temperature up to +60^oC

Maximum ambient temperature +40^oC

type		power		Qm3/h	0.3	0.6	0.9	1.2	1.5	1.8	2.1	2.4	3.0
single phase	three phase	kw	hp	l/min	5	10	15	20	25	30	35	40	50
LYCKM-50	LYCK-50	0.37	0.50		31	27	24	20	16	13	9	5
LYCKM-50-BP	LYCK-50-BP	0.25	0.33		20	20	20	20	16.5	13	9	5
LYCKM-80-E	LYCK-80E	0.60	0.85	H(M)	46	42	38	34	30	26	22	18	10
LYCKM-90-E	LYCK-90-E	0.75	1.0		49	45	41	37	33	29	25	21	13
LYCKRM-80-E	LYCKR-80-E	0.60	0.85		46	42	38	34	30	26	22	18	10
LYCKRM-90-E	LYCKR-90--E	0.75	1.0		49	45	41	37	33	29	25	21	13
LYCKRM-100-E	LYCKR-100-E	090	1.25		52	48	44	40	36	32	28	24	16

Submersible pump-Submersible pump LY-WQD

2010-7-16 17:30:23

PERFORMANCE RANGE

Flow rate up to 120l/min(7.2m³/h)

Dynamic head up to 7m

OPERATING LIMITS

Maximum operating depth 2m below water level

Maximum fluid temperature +400C

Maximum passage for suspended solids F10 mm

Maximum emptying level 9mm from the bottom

MODEL		POWER	QM3/H	0	1.8	3.0	4.5	6.6	9.0	13.2	15.0	21.0
SINGLE PHASE	THREE PHASE	KW/HP	L/MIN	0	30	50	75	110	150	220	250	350
LYQDXM-450	LYQD-450	0.45/0.55	HM	8	7	6	4	1					2.5	1.7	1
LYQDXM-550	LYQDXM-550	0.37/0.5		17	16	-	15	10	8	7.2	6.5	5.5	4.5	3.2	2
LYQDXM-750	LYQDXM-750	0.55/0.75		21	-	-	20	-	18	15	12	8.7	7.5	5.7	4
LYQDXM-1100	LYQDXM-1100	0.75/1		28	-	27	26	25	24	20	18	15	9.5	7.7	6
LYQDXM-1500	LYQDXM-1500	1.1/1.5		34	-	-	-	-	32	28	26	25	24	-	-

Submersible pump-Submersible pumpLY-QDX

2010-7-16 17:30:23

STRUCTRAL CHARACTERISTICS

stainless steel DELIVERY BODY

stainless steel BASE

technopolymer open impeller

EXTERNAL FLOAT SWITCH for automatic pump operation

stainless steel MOTOR SHAFT

carbon /alumina MECHANICAL SEAL

sealed induction MOTOR designed for continuous duty

the thermal cutout relay (motor potector) is incorporated

INSULATION class B

neoprene submersible SUPPLY CABLE. supplied standard with 5 meters of cable and plug(10 meters on request).

CONSTRUCTION AND SAFTY STANDARDS in compliance with IEC.

PERFORMANCE RANGE

Flow rate up to 110L/MIN(6.6M³/H)

Dynamic head up to16M

DPERATING LIMITS

Maximum operating depth 3m below water level

Maximum fluid temperature +400C

Maximum passage for suspended solids F10mm

Maximum emptying level 14mm for the bottom

innovative design and advanced technology and advanced technology are the main features behind these new pumps,designed to be easy to use and extermely reliable.

MODEL		POWER	QM3/H	0	0.6	1.2	1.8	2.4	3.0	3.6	4.2	4.8	5.4	6.0	6.6
SINGLE PHASE	THREE PHASE	KW/HP	L/MIN	0	10	20	30	40	50	60	70	80	90	100	110
LYQDXM-250	LYQD-250	0.25/0.33	HM	7.5	7	6.5	6	5.5	5	4.5	3.7	3.2	2.5	1.7	1
LYQDXM-370	LYQDXM-370	0.37/0.5		17	16	-	15	10	8	7.2	6.5	5.5	4.5	3.2	2
LYQDXM-550	LYQDXM-550	0.55/0.75		21	-	-	20	-	18	15	12	8.7	7.5	5.7	4
LYQDXM-750	LYQDXM-750	0.75/1		28	-	27	26	25	24	20	18	15	9.5	7.7	6
LYQDXM-1100	LYQDXM-1100	1.1/1.5		34	-	-	-	-	32	28	26	25	24	-	-
LYQDXM-1500	LYQDXM-1500	1.5/2		38	-	-	-	-	36	34	32	30	28	-	-

Boosting pump-Boosting pump LY-BPE

2010-7-16 17:30:23

the bove pump from top to bottom are as follows:

MODEL:LYBP710E

POWER SOURCE:380V/50HZ

OUTPUT:1000W

HEAD:18M

TONNAGE:(TON/HOUR)16

PIPE SIZE:70MM

MODEL:LYBP740E

POWER SOURCE:220V/50HZ

OUTPUT:750W

HEAD:20M

TONNAGE:(TON/HOUR)8

MODEL:LYBP730E

POWER SOURCE:220V/50HZ

OUTPUT:400W

HEAD:20M

TONNAGE:(TON/HOUR)4.5

MODEL:LYBP720E

POWER SOURCE:220V/50HZ

OUTPUT:550W

HEAD:18M

TONNAGE:(TON/HOUR)12

Boosting pump-Boosting pump LYBP

2010-7-16 17:30:23

MAIN USE:

This pump adapts to the cold oressurized circulation of hot water under 100 degress cebtigrade.Especically this pump absolutely solves he lit fire properly of shower owing to the lower pressure and unreliable pressure.when the tap water is of low pressure,th pump can boost pressure.It can also boost pressure for solar water heaters,boost pressure and circulate nfor industrial equipmens,and increase oxygen ponds and fish tanks

MODEL	POWER(W)	VOLTAGE(V)	FREQUENCY(HZ)	INLET-OUTLET DIA.(MM)	HEAD(M)	CAPACITY(L/MIN)	G.W.(KG)	QTY	PACKING DIMENSION(CM)	L	W	H
LYBP-1	50	220-240	50/60	15	5	12	18	8		39	35	34.5
LYBP-2	90	220-240	50/60	15	7	15	19	8		39	35	34.5
LYBP-3	120	220-240	50/60	15	10	22	20	8		39	35	34.5

Garden Pump-Garden pump LYJSP-FTS;GTS

2010-7-16 17:30:23

model	power	h.max	q.max	suction	inch	BAR
LYJSP-600FTS	600	35	2800	9	1	2/3
LYJSP-800FTS	800	40	3200	9	1	2/3
LYJSP-1000FTS	1000	44	3500	9	1	2/3
LYJSP-1200FTS	1200	50	3800	9	1	2.5/4

Garden Pump-Garden pump LYJSP-600BTS

2010-7-16 17:30:23

STRUCTURAL CHARACTERISTICSpump body cast iron,stainless,plastic(ABS or NYLON); impeller ABS,brass ,noryl,stainless steel;motor closed ,externally ventilated;insulation class B(if class F reqired);protection class IP44 or IP54;duty continuously rated;mechanical seal stainless sttel/carbon-ceramices;shaft 45# steel (staibless steel if required);thermal protector;power feeding 230v/50hz,other voltage/frequency;can be avliable on requirement

model	power	h.max	q.max	suction	inch	packing	kg	quantity in 20" container
LYJSP-600ATS	600	35	2800	9	1	46.5X33X57	12.6/14.5	360
LYJSP-800ATS	800	40	3200	9	1	46.5X33X57	13/14.9	360
LYJSP-1000ATS	1000	44	3500	9	1	46.5X33X57	13.3/15.2	360
LYJSP-1200ATS	1200	50	3800	9	1	46.5X33X57	123.8/15.7	360

Garden Pump-Garden pumpLYJSP-600CS

2010-7-16 17:30:24

model	power	h.max	q.max	suction	inch	packing	kg	quantity in 20" container
LYJSP-600CS	600	35	2800	9	1	49X21X26	8.2/8.7	1050
LYJSP-800CS	800	40	3200	9	1	49X21X26	8.6/9.1	1050
LYJSP-1000CS	1000	44	3500	9	1	49X21X26	8.9/9.4	1050
LYJSP-1200CS	1200	50	3800	9	1	49X21X26	9.3/9.8	1050

Garden Pump-Garden pumpLYJSP-AT

2010-7-16 17:30:25

model	power	h.max	q.max	suction	inch	packing	kg	quantity in 20" container
LYJSP-600A	600	35	2800	9	1	37.5X21X26	6.7/7	1400
LYJSP-800A	800	40	3200	9	1	37.5X21X26	7.1/7.4	1400
LYJSP-1000A	1000	44	3500	9	1	37.5X21X26	7.4/7.7	1400
LYJSP-1200A	1200	50	3800	9	1	37.5X21X26	7.8/8.1	1400

Garden Pump-Garden pump LYJSPCTS

2010-7-16 17:30:26

STRUCTURAL CHARACTERISTICSpump body cast iron,stainless,plastic(ABS or NYLON); impeller ABS,brass ,noryl,stainless steel;motor closed ,externally ventilated;insulation class B(if class F reqired);protection class IP44 or IP54;duty continuously rated;mechanical seal stainless sttel/carbon-ceramices;shaft 45# steel (staibless steel if required);thermal protector;power feeding 230v/50hz,other voltage/frequency;can be avliable on requirement

Submersible pump-Submersible pump LYQSA

2010-7-16 17:30:26

these pumps are all adopt stainless stell pump head

Submersible pump-Submersible pump LYQJ

2010-7-16 17:30:26

OPERATING INSTRUCTIONS

95QJ seies of multiple-degree(deepwell)submersible pump is a newly developed product of te company it adopts imported fine quality stainless steel and bronze as its pump body material .It has features of beautiful appearance,solid structure,super high lift and high efficient energh saving ,erc,with a service life of over ten times longer than that of othe common worm pumps.Furthermore,it has a free lift range,suitable for all lift ranges.Due to ots small lateral size it can be used in all wells of voer 4 inches(included) in diamerer.It now becomes indispensable in dep-well pumping and high-building water supplying.

PERFORMACE RANGE

Flow ate up tp 400l/min(24m³/h)

Dynamic head up to 120m

OPERATING LIMITS

Maximum fluid temperature+300C

Maximum sand content 150g/³

Starts:max.20/h

The exclusive patented design of the water end,thanks to the combination of the front housing with the axial movement of the impeller,guarantees the pump against any damage caused by sand,including blocking.

Submersible pump-Submersible pump LYQJ(6")

2010-7-16 17:30:26

Structural Characteristics

Discharged Connection

Rugged stainless steel construction with provision for connection of lifting cable

Stainless steel construction

stau\inless stell casings and shaft ensure strength and provides clean,rust free,long term operation nylon impeller.

Radial bearing

Durable operation and long lift ensured by use of high tech material

Splined shaft

provide positive location and drive for the impellers

Corroson prevention

AIAI304 stainless steel is used for the motor frame and motor base and cover.the shaft end is made out of AISI303 stainless steel.

Thrust bearing

ldeal non-contacting operation with less wear and long bearing life is assured with the unipue design hydrodynamic thrust bearing.(for which power over 2.2kw)

Built in check vavle

prevents backflow and reduces the risk of water hammer

shaft sealing system

A layrinth seal with a sand slinger provide an effective protection against sand

Filing liquid

water with food grade compound provides

excellent cooling and lubrication

pressure equalising system

optimally designed rubber diaphragm equalizes pressure changes due to heat expansion

Boosting pump-Boosting pump LYBPA

2010-7-16 17:30:26

these above pumps from the top to bottom as follows are:

MODEL:LYBP750A

POWER SOURCE:380V/50HZ

OUTPUT:1000W

HEAD:30M

TONNAGE:(TON/HOUR)18

PIPE SIZE:80MM

MODEL:LYBP760A

POWER SOURCE:380V/50HZ

OUTPUT:900W

HEAD:25M

TONNAGE:(TON/HOUR)13.5

MODEL:LYBP780E

POWER SOURCE:220V/50HZ

OUTPUT:750W

HEAD:14M

TONNAGE:(TON/HOUR)5.5

MODEL:LYBP700E

POWER SOURCE:220V/50HZ

OUTPUT:250W

HEAD:15M

TONNAGE:(TON/HOUR)6

PUMP INSTALLATION AND APPLICATIONS these pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump xomponents. they are extremely reliable,light,economical and simple to use ,finding many uses in domestic applications,in particular the automatic distribution of water from small and medium-size surge tanks,watering gardens.etc.these pumps shoule be installed in a covered area,protected against the weather.

PERFORMANCE the wide range of pumps in the LYJSP series satisfied the most varied requirments with features such as:-high heads with respect to power required；-flat operating and power absorption curves,giving moderate curve variations with respect to large variatios in delivery demand;-very low noise levels within the flied of applications;-high tolerance of the presence of entrained air in the fluid to be pumped;-suction capacity up to 9 meters.

STRUCTURAL CHARACTERISTICS pump body cast iron,stainless,plastic(ABS or NYLON); impeller ABS,brass ,noryl,stainless steel;motor closed ,externally ventilated;insulation class B(if class F reqired);protection class IP44 or IP54;duty continuously rated;mechanical seal stainless sttel/carbon-ceramices;shaft 45# steel (staibless steel if required);thermal protector;power feeding 230v/50hz,other voltage/frequency;can be avliable on requirement.

FEATURES:

This pump adopts shieding set of stainless steel and keep water away from electrical machinery completely,without seal,thus competely solove pump leaking,adopted the ceramic bearing.it has long-working time,and has completelty soloved the noise problem in working.with automatic-controlling devices,it is wasy for operation.some parts of pump are made of stainkless steel,which keep water much more saitary.

MAIN USE:

This pump adapts to the cold oressurized circulation of hot water under 100 degress cebtigrade.Especically this pump absolutely solves he lit fire properly of shower owing to the lower pressure and unreliable pressure.when the tap water is of low pressure,th pump can boost pressure.It can also boost pressure for solar water heaters,boost pressure and circulate nfor industrial equipmens,and increase oxygen ponds and fish tanks

FEATURES:

This pump adopts shieding set of stainless steel and keep water away from electrical machinery completely,without seal,thus competely solove pump leaking,adopted the ceramic bearing.it has long-working time,and has completelty soloved the noise problem in working.with automatic-controlling devices,it is wasy for operation.some parts of pump are made of stainkless steel,which keep water much more saitary.

MAIN USE:

working principle:the series is a singlke open impeller centrifugal submersibled rainage pump designed to function either partly to totally submerged.the impeller,mounted on the end of the drive shaft,consists of a back disk and blades.then fluid enters the rotating blade channel through the suction.where it moves radially from the centre outwards,acquiring energy both in the form of pressure and increased speed,when it leaves the impeller the fluid is conveyed towards the volute,here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.correct motor cooling is ensured by the fluid being pumped.

pump installation and applicationsQSB is designed to pump clear or slightly dirty water notm containing abrasive substances.it is reommended for small emptying jobs such as flooded basements and garages,holiday homes,tubs and used domestic water disposal.a purposely bulit pit with minimum dimensions 350x350x350h mm is recommended for fixed installation,to provide total drainage and allow correct operation of the float switch.this system antomatically starts the pmp when the fluid reached a preset level,stopping it once the fluid has been emptied.installing a suitable non return vavle on the delvery pipe prevents reverse flow when the pump stops.

working principle:the series is a singlke open impeller centrifugal submersibled rainage pump designed to function either partly to totally submerged.the impeller,mounted on the end of the drive shaft,consists of a back disk and blades.then fluid enters the rotating blade channel through the suction.where it moves radially from the centre outwards,acquiring energy both in the form of pressure and increased speed,when it leaves the impeller the fluid is conveyed towards the volute,here part of the kinetic energy is transformed into pressure energy,and the fluid leaves the pump via the side delivery opening in the pump body.correct motor cooling is ensured by the fluid being pumped.

pump installation and applicationsQSB is designed to pump clear or slightly dirty water notm containing abrasive substances.it is reommended for small emptying jobs such as flooded basements and garages,holiday homes,tubs and used domestic water disposal.a purposely bulit pit with minimum dimensions 350x350x350h mm is recommended for fixed installation,to provide total drainage and allow correct operation of the float switch.this system antomatically starts the pmp when the fluid reached a preset level,stopping it once the fluid has been emptied.installing a suitable non return vavle on the delvery pipe prevents reverse flow when the pump stops.

WORKING PRINCIPLE:

The series are SELF-PRIMING CENTRIFUGAL PUMPS with cast iron body,self priming is achieved using an ejector,housed in the pump body,The total delivery produced by the closed centrifugal impeller sent only party to the delivery opening.The remaining water is recirculated through the ejector,which is connected to the suction chamber and generated te neccessary vaccun of self-priming the pump.When first starting the pump nody fill with water,without bothering to fill the suction piping and elminate any air pockets.When the pump is started up the water in the pump the vaccum thus generated causes water to rise in the suction piping,thus self piming the pump.Since the self-priming system operates,continuously,these pumps are practiically unaffected even by the presece of large amounts of entrained air in the fluid being pumped,The series,based on past TOPexperience,is designed with particular attention to comp shape,lightweight structure and choice of material,combining high performance with extermely quiet running.

PUMP INSTALLATIONA ND APPLICATIONS

These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components.

THY ARE EXTERMELY RELIABLE,LIGHT,ECONOMICAL AND SIMPLE TO USE,FINDING MANY USES IN DOMESTIC APPLICATIONS,IN PARTICULAR THE AUTOMATIC DISTRIBUTION OF WATER FROM SMALL AND MEDIUM-SIZE SURGE TANKS,WATERING GARDENS.ECT

These pumps should be installed in a covered area,protected against the weather.

N.B ,it is always advisable to install a foot vavle or a non return valve on the suction opening.

PERFORMACE

The wide range of pumps in the series satisfied the most varied requirements with feature such as:

-high heads with respect to power required:

-flat operating and power absorption curves,giving moderate curve variation with respect to large variations in delivery demand;

-very low noise levels within the flied of application;

-high tolerance of presence of entrained air in the fluid to be pumped;

-suction capacity up to 9 meters.

STRUCTURAL CHARACTERISTICS

cast iron PUMP BODY

Stainless steel PUMP BODY COVER serving also as mechanical seal housing.

Technopolymer EJECTOR UNIT (approved for drinking water)

Centrifugal radial flow IMPELLER in technopolymer (approved for drinking water)

Ceramic and graphite MECHANICAL SEAL

MOTOR:the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and extermally ventilated,suitable for continuous duty ,INSULATION class F.(class B up to 0.90kw).

The thermal cutout relay(motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector,with connections according to current standards.

PROTECTION IP 44

CONSTRUCTION AND SAFTY STANDARD in compliance with IEC

Warranty:1 year(according to our general sales conditions)

WORKING PRINCIPLE:

The series are SELF-PRIMING CENTRIFUGAL PUMPS with cast iron body,self priming is achieved using an ejector,housed in the pump body,The total delivery produced by the closed centrifugal impeller sent only party to the delivery opening.The remaining water is recirculated through the ejector,which is connected to the suction chamber and generated te neccessary vaccun of self-priming the pump.When first starting the pump nody fill with water,without bothering to fill the suction piping and elminate any air pockets.When the pump is started up the water in the pump the vaccum thus generated causes water to rise in the suction piping,thus self piming the pump.Since the self-priming system operates,continuously,these pumps are practiically unaffected even by the presece of large amounts of entrained air in the fluid being pumped,The series,based on past TOPexperience,is designed with particular attention to comp shape,lightweight structure and choice of material,combining high performance with extermely quiet running.

PUMP INSTALLATIONA ND APPLICATIONS

These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components.

THY ARE EXTERMELY RELIABLE,LIGHT,ECONOMICAL AND SIMPLE TO USE,FINDING MANY USES IN DOMESTIC APPLICATIONS,IN PARTICULAR THE AUTOMATIC DISTRIBUTION OF WATER FROM SMALL AND MEDIUM-SIZE SURGE TANKS,WATERING GARDENS.ECT

These pumps should be installed in a covered area,protected against the weather.

N.B ,it is always advisable to install a foot vavle or a non return valve on the suction opening.

PERFORMACE

The wide range of pumps in the series satisfied the most varied requirements with feature such as:

-high heads with respect to power required:

-flat operating and power absorption curves,giving moderate curve variation with respect to large variations in delivery demand;

-very low noise levels within the flied of application;

-high tolerance of presence of entrained air in the fluid to be pumped;

-suction capacity up to 9 meters.

STRUCTURAL CHARACTERISTICS

cast iron PUMP BODY

Stainless steel PUMP BODY COVER serving also as mechanical seal housing.

Technopolymer EJECTOR UNIT (approved for drinking water)

Centrifugal radial flow IMPELLER in technopolymer (approved for drinking water)

Ceramic and graphite MECHANICAL SEAL

MOTOR:the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and extermally ventilated,suitable for continuous duty ,INSULATION class F.(class B up to 0.90kw).

The thermal cutout relay(motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector,with connections according to current standards.

PROTECTION IP 44

CONSTRUCTION AND SAFTY STANDARD in compliance with IEC

Warranty:1 year(according to our general sales conditions)

WORKING PRINCIPLE

Thr\e series consists of PUMPS with a SINGLE CENTRIFUGAL IMPELLER.These pumps have an essential form are the result of precise design choice,made to obtain specific performance characteristics.The impeller,mounted on the end of the motor shaft,directly faces the suction opening machined in the pump.The shape of impeller channel transfer energy to the fluid both in the form of pressure and an increase in speed.After leaving the fluid passes to the volute and tapered diffuser which transform part of the kinetic energy energy into pressure energy.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handing clean and fluids which are not chemically aggressive to the pump components.

THE ARE EXTREMELY RELIABLE,SIMPLE TO USE,QUIET AND VIRTUALLY MAINTANCE-FREE,FINDING MANY USES IN DOMESTIC AND CIVIL APPLICATIONS,AND IN PARTICULAR THE AUTOMATIC DISTRIBUTION OF WATER FRO,SMALL AND MEDIUM-SIZE SURGE TANKS,TRANSFERRING WATER,WATERING GARDENS,ECT.

These pumps should be installed in a covered area,protected against the weather.

PERFORMANCE

The range of pumps making uo he series is particularly varied:however when developing the single units,care was taen to aim at standardizing the following features within the series:

-Ample and stable characteristic curves

-outputs having food absolute values and tendencially flat curves:

-Flat absorption curves at high delivery rates,preventing motor over loading even during prolonged use;

-Good suction capacities both at low and high delivery rates

STRUCTURAL CHARACTERISTICS

cast iron PUMP BODY

stainless stell PUMP BODY COVER,in cast iron on more powerful model.

BRASS IMPELLER,with radial peripheral blades,floating on the shaft.

Ceramic and graphite MECHANICAL SEAL.

MOTOR :the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and externally vebtilated,suitable for continuous duty.INSULATION class F(B up to 0.75kw)

the thermal cutout relay(motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector,with connections according to current standards.

PROTECTION IP44

CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.

WARRANTY:1 YEAR (according to our general sales conditons)

WORKING PRINCIPLE

Thr\e series consists of PUMPS with a SINGLE CENTRIFUGAL IMPELLER.These pumps have an essential form are the result of precise design choice,made to obtain specific performance characteristics.The impeller,mounted on the end of the motor shaft,directly faces the suction opening machined in the pump.The shape of impeller channel transfer energy to the fluid both in the form of pressure and an increase in speed.After leaving the fluid passes to the volute and tapered diffuser which transform part of the kinetic energy energy into pressure energy.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handing clean and fluids which are not chemically aggressive to the pump components.

THE ARE EXTREMELY RELIABLE,SIMPLE TO USE,QUIET AND VIRTUALLY MAINTANCE-FREE,FINDING MANY USES IN DOMESTIC AND CIVIL APPLICATIONS,AND IN PARTICULAR THE AUTOMATIC DISTRIBUTION OF WATER FRO,SMALL AND MEDIUM-SIZE SURGE TANKS,TRANSFERRING WATER,WATERING GARDENS,ECT.

These pumps should be installed in a covered area,protected against the weather.

PERFORMANCE

The range of pumps making uo he series is particularly varied:however when developing the single units,care was taen to aim at standardizing the following features within the series:

-Ample and stable characteristic curves

-outputs having food absolute values and tendencially flat curves:

-Flat absorption curves at high delivery rates,preventing motor over loading even during prolonged use;

-Good suction capacities both at low and high delivery rates

STRUCTURAL CHARACTERISTICS

cast iron PUMP BODY

stainless stell PUMP BODY COVER,in cast iron on more powerful model.

BRASS IMPELLER,with radial peripheral blades,floating on the shaft.

Ceramic and graphite MECHANICAL SEAL.

MOTOR :the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and externally vebtilated,suitable for continuous duty.INSULATION class F(B up to 0.75kw)

the thermal cutout relay(motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector,with connections according to current standards.

PROTECTION IP44

CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.

WARRANTY:1 YEAR (according to our general sales conditons)

WORKING PRINCIPLE

The series consists of PERIPHERAL PUMPS,so called because the peripheral edge of the impeeler contains numerous radial blades,designed to yield energy to the fluid beig pumped.The paricular shape of the blades rapidly tansfers redial recirculation motion to the fluid on entry to the pump between the impeller blades and the double channel,machined on each of the pump body.Since each of the numerous blades helps transfer energy,the fluid pressure increase progressively as it passes from the suction opening to the delivey opening,ensuring an even,non-pulsing flow and high accuradte mechanical machining during manufactore to prevent a drop in performance.

ZHEJIANG LANGYOU PUMP CO.,LTD.has been in the peripheral pump market sinc 1988 and hs developed an uneaqualled experience in optimizing design,This,together with great efforts in achieving fully automated protection processes,makes TOP one of the leading world industries in its field.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pmp components.RELIABLE,ECONOMIC AND SIMPLE TO USE.THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS AND THE AUTOMATIC DISTRIBUTION OF WATER FORM SUEGE TANKS,WATERING GARDENS AND FOR BOOSTING INSUFFICIENT MAINS WATER PRESS USE.

These pumps should be installed in a covered area,protected against the weather.

PERFORMANCE

The wide range of pumps in the series satifies the most various operating requirements with features such as :-high head with respect to power requirements;stable operating curves,with small variations in delivery rates with respect to large variations in the pressure demand;high tolerance of the presence of entrained air in the liquid being pumped.

STRUCTURE CHARACTERISTICS

Cast iron PUMP BODY

Aluminum MOTOR BRACKET

BRASS IMPELLER,with radial perpheral blades,floating on the shaft.

Ceramic and graphite MECHANICAL SEAL.

MOTOR:the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and externally ventilated ,with ((IMB3))structural shape,suitable for continuous duty.NSULATION class F(B up to 0.75kw).

The thermal cutout relay (motor protector) is incorporated in single phase motors.

Three phase motors require an adquate external motor protector,with connections according to current standards.

PROTECTION IP44

CONSTRUCTION AND SAFETY STANDARDS IN compliance with IEC

WARRANTY :1 YEAR (according to our general sales conditions).

WORKING PRINCIPLE

The series consists of PERIPHERAL PUMPS,so called because the peripheral edge of the impeeler contains numerous radial blades,designed to yield energy to the fluid beig pumped.The paricular shape of the blades rapidly tansfers redial recirculation motion to the fluid on entry to the pump between the impeller blades and the double channel,machined on each of the pump body.Since each of the numerous blades helps transfer energy,the fluid pressure increase progressively as it passes from the suction opening to the delivey opening,ensuring an even,non-pulsing flow and high accuradte mechanical machining during manufactore to prevent a drop in performance.

ZHEJIANG LANGYOU PUMP CO.,LTD.has been in the peripheral pump market sinc 1988 and hs developed an uneaqualled experience in optimizing design,This,together with great efforts in achieving fully automated protection processes,makes TOP one of the leading world industries in its field.

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pmp components.RELIABLE,ECONOMIC AND SIMPLE TO USE.THEY ARE SUITABLE FOR DOMESTIC APPLICATIONS AND THE AUTOMATIC DISTRIBUTION OF WATER FORM SUEGE TANKS,WATERING GARDENS AND FOR BOOSTING INSUFFICIENT MAINS WATER PRESS USE.

These pumps should be installed in a covered area,protected against the weather.

PERFORMANCE

The wide range of pumps in the series satifies the most various operating requirements with features such as :-high head with respect to power requirements;stable operating curves,with small variations in delivery rates with respect to large variations in the pressure demand;high tolerance of the presence of entrained air in the liquid being pumped.

STRUCTURE CHARACTERISTICS

Cast iron PUMP BODY

Aluminum MOTOR BRACKET

BRASS IMPELLER,with radial perpheral blades,floating on the shaft.

Ceramic and graphite MECHANICAL SEAL.

MOTOR:the pumps are coupled directly to an asynchronous,high efficiency TOP induction motor of suitable size,which is quiet running,closed and externally ventilated ,with ((IMB3))structural shape,suitable for continuous duty.NSULATION class F(B up to 0.75kw).

The thermal cutout relay (motor protector) is incorporated in single phase motors.

Three phase motors require an adquate external motor protector,with connections according to current standards.

PROTECTION IP44

CONSTRUCTION AND SAFETY STANDARDS IN compliance with IEC

WARRANTY :1 YEAR (according to our general sales conditions).

The working principle and characteristics of centrifugal pump

2010-7-16 14:13:29

The working principle of centrifugal pumps: centrifugal pump impeller of the liquid depend on the role of rotating the original motivation of the mechanical energy transfer to the liquid. As the role of centrifugal flow of liquid from the impeller import export process, its speed and pressure to have been able to increase, by the impeller discharge of liquid through the pressure of the chamber, most of the speed can be converted to pressure energy, and transportation pipeline along Paichu out, this time, the impeller discharges the liquid inlet formed by vacuum or low pressure, suction pool of liquid in the surface pressure (atmospheric pressure) under the action of being pressed into the impeller of imports, thus, rotating with the impeller on the continuous to suction and discharge liquid. Pump features: its features are: high speed, small size, light weight, high efficiency, traffic flow, simple structure, stable performance, easy operation and maintenance; its shortcomings are: to be filled before starting the liquid pump. Impact on pump performance liquid precision large, can only be used for precision liquid similar to water, flow, scope :5-20 thousand cubic meters / hour, lift the range of 3-2800 meters.

to celebrate the world show

2010-6-17 9:48:05

world new established in shanghai ,welcome to shanghai ,welcomw to zhejiang ,welcome to wenling ,welcome to langyou pump co.,ltd

to celebrate the world show

2010-6-17 9:47:57

world new established in shanghai ,welcome to shanghai ,welcomw to zhejiang ,welcome to wenling ,welcome to langyou pump co.,ltd

Basic structure centrifugal pump

2010-6-11 14:01:49

Basic structure of the centrifugal pump is composed of six parts, namely: impeller, shaft, bearings, seal rings, stuffing box. 1 centrifugal impeller is a core component of its speed and high output force, the impeller blade has played a major role in the assembly before the impeller by static test. Impeller on the inside and outside surfaces required to be smooth to reduce flow friction loss. 2, pump, also known as the pump casing, which is the main water pump. Play a role in supporting fixed, and with the installation of the bearing bracket connected. 3, pump shaft and motor function is connected by coupling, the motor torque transmission impeller, it is the transfer of mechanical energy of the main components. 4, the bearing is set on the support shaft in the shaft component, there are two kinds of rolling bearings and plain bearings. Use butter as a lubricant oil bearing should be appropriate is 2 / 3 3 / 4 size too much may have a fever, there are too few sound and heat! Pump bearing structure is transparent to the oil used for lubricants, fuel to the oil level line. Too much oil to be leaking along the shaft and drift *, too little overheated bearings and also burn the accident! Bearing in the pump during operation the maximum temperature of 85 ℃ in the general run of 60 degrees, if we should find out the reasons high (whether impurities, oil is black, is water) and timely manner! 5, sealing ring, also known as leakage reduction ring. Impeller and pump casing of imports over the gap between high-pressure areas cause the pump's water flow through the gap area of low pressure affecting the pump out water, reducing efficiency! Gap is too small will cause the impeller and pump casing friction and wear. In order to increase the return to reduce the internal leakage resistance and delay of the impeller and pump casing life of the pump impeller shell edge and foreign aid junction with sealing ring, sealing the gap remained at 0.25 ~ 1.10mm hydrometer. 6, stuffing mainly by filling, seal rings, cylinder filling, packing gland, seal tubes. The main function of stuffing is to be closed between the pump casing and shaft gap, not to pump the water does not flow out to not let outside air into the pump. Always maintain the vacuum inside the pump! When the pump and fill the water seal friction depends on the heat pipe to live on the water to the cooling water seal circle to fill! To maintain the normal operation of pumps. So check the pump to run during the tour of inspection of the stuffing is the special attention! Running six hundred hours or so should be replaced on the fill.

happy time good business

2010-4-28 15:25:51

i wish everyone wil have a good business ,and hope everybody have a good health,tks

welcome to visit us

2010-4-26 10:05:00

dear distingulised guests : welcome to visit us ,and i think may be you are so tried after this canton fair ,we sincerely want to visit you to attend oue factory ,waiting fo you come ,tks

welcome to vist us

2010-4-8 10:43:17

welcome to visit our booth on the cantonfair ,our booth no.: is 1.1k19,please welcome!

International News

2010-3-20 15:22:58

International News This comprehensive and easy to read document sets out for the first time the complex legislative arrangements that are currently in force in the UK permitting unlicensed herbal remedies to be supplied to individual patients following a face-to-face consultation. It is a truly consultative document and the MHRA have confirmed that further consultation will follow on more specific issues once the responses to MLX 299 have been evaluated. The proposals are in response to the recommendations of:the House of Lords Report of November 2000 on Complementary & Alternative Medicine (CAM); and the Report of September 2003 of the Herbal Medicine Regulatory Working Group (HMRWG) which was set up as a result of the Lord's Report.

A Green Boost for Detroit: Conservation Leadership Corps Provides Jobs to 110 Detroit Students

2010-3-12 15:15:48

A Green Boost for Detroit: Conservation Leadership Corps Provides Jobs to 110 Detroit Students ] DETROIT, July 30 /-- The city of Detroit is getting a much-needed "green" boost this summer, as more than 100 Detroit public high school students are participating in the Conservation Leadership Corps (CLC), a summer jobs program promoting environmental stewardship and skills development. Created and sponsored by Johnson Controls, Inc. (NYSE: JCI), the Student Conservation Association (SCA) and The Greening of Detroit, the program has returned to Detroit following the success of its launch last year. (Logo: http://www.newscom.com/cgi-bin/prnh/20081030/AQTH055ALOGO) The program in Detroit is providing 110 local students, a 20 percent increase over last year, the opportunity to earn and learn as they participate in purposeful summer employment in environmental conservation, while also receiving job readiness training. "The Conservation Leadership Corps is a great example of a public-private partnership that is creating jobs and helping young people develop skills and experience they will need to be part of Michigan's economic transformation," said Lt. Gov. John Cherry. "We are pleased that federal Recovery Act investments have allowed this program to expand and have an even greater positive impact on the City of Detroit and its citizens."

international news

2010-2-27 15:07:36

NORTH AMERICA Ships plug into HV connection ABB is supplying Holland America Line with its award-winning high voltage shore connections (HVSC) for ships berthed in Seattle. The HVSC enables the vessels to cut fuel costs and virtually eliminate greenhouse gas emissions and noise pollution during stop-overs at one of the leading ports on the US west coast. For Seattle, it means improved air quality and increased revenues for the city’s publicly owned electric utility. ASIA AND EUROPE FACTS for the steel industry Six orders totalling US$15 million have been awarded to ABB to install flexible AC transmission systems (FACTS) at steel plants in China, Oman, Spain, and Turkey. All contracts are based on ABB’s SVC technology which improves the security, capacity and flexibility of power transmission and distribution systems, as well as productivity and power quality in industry. ASIA US$42 million power order in India ABB has won a US$42 million contract for an integrated network management system from the main electricity transmission company in the Indian state of Karnataka, Karnataka Power Transmission Corporation Limited (KPTCL). The system integrates supervisory control and data acquisition (SCADA) technology with energy management and distribution management systems. These will monitor and control 830 main transmission and distribution substations spread across the state of Karnataka, including the city of Bangalore. NORTH AMERICA Dry cooling for HVDC station The Public Service Company of New Mexico (PNM) is upgrading the control and valve cooling systems of existing ABB HVDC (High Voltage Direct Current) system delivered over 20 years ago. A modern ABB dry cooling system will replace the original wet cooling system, eliminating the use of scarce water resources. The upgrade will also extend the lifetime of the converter stations. MIDDLE EAST Major substation order for the Gulf Qatar General Electricity and Water Corporation, Kahramaa, has awarded ABB with a US$450 million contract to support the country’s rapid growth by expanding the power transmission system. The contract includes three substations and a telecommunication package for Qatar's Phase VII grid expansion project, a countrywide effort to increase power in areas of high growth, where electricity demand is greatest.

International News

2010-2-3 15:05:06

Other news around the world. NORTH AMERICA Ships plug into HV connection ABB is supplying Holland America Line with its award-winning high voltage shore connections (HVSC) for ships berthed in Seattle. The HVSC enables the vessels to cut fuel costs and virtually eliminate greenhouse gas emissions and noise pollution during stop-overs at one of the leading ports on the US west coast. For Seattle, it means improved air quality and increased revenues for the city’s publicly owned electric utility. ASIA AND EUROPE FACTS for the steel industry Six orders totalling US$15 million have been awarded to ABB to install flexible AC transmission systems (FACTS) at steel plants in China, Oman, Spain, and Turkey. All contracts are based on ABB’s SVC technology which improves the security, capacity and flexibility of power transmission and distribution systems, as well as productivity and power quality in industry. ASIA US$42 million power order in India ABB has won a US$42 million contract for an integrated network management system from the main electricity transmission company in the Indian state of Karnataka, Karnataka Power Transmission Corporation Limited (KPTCL). The system integrates supervisory control and data acquisition (SCADA) technology with energy management and distribution management systems. These will monitor and control 830 main transmission and distribution substations spread across the state of Karnataka, including the city of Bangalore. NORTH AMERICA Dry cooling for HVDC station The Public Service Company of New Mexico (PNM) is upgrading the control and valve cooling systems of existing ABB HVDC (High Voltage Direct Current) system delivered over 20 years ago. A modern ABB dry cooling system will replace the original wet cooling system, eliminating the use of scarce water resources. The upgrade will also extend the lifetime of the converter stations. MIDDLE EAST Major substation order for the Gulf Qatar General Electricity and Water Corporation, Kahramaa, has awarded ABB with a US$450 million contract to support the country’s rapid growth by expanding the power transmission system. The contract includes three substations and a telecommunication package for Qatar's Phase VII grid expansion project, a countrywide effort to increase power in areas of high growth, where electricity demand is greatest.

Learning English - Words in the News

2010-1-31 15:25:41

Learning English - Words in the News 19 July, 2006 - Published 11:01 GMT Romanian spy kids Romanian President Traian Basescu Officials in Romania have revealed that the Communist-era secret police, the Securitate, used children as young as twelve to spy on parents, teachers and others. This news has shocked Romanian society. This report from Rob Cameron: The Securitate, with its network of agents and informers, struck fear into the hearts of ordinary Romanians. But 16 years after the end of the Ceaucescu era, news that those informers included schoolchildren has been greeted with genuine shock. According to the National Council for Research into the Securitate Archive, secret police operatives recruited networks of children to spy on their elders. Cazimir Ionescu is the Council's spokesman. "The network was active in all districts. Kids as young as 12 or 14 were part of this. They were supposed to spy on their schoolfriends, their schoolfriends' parents and also their teachers." The Council says it's uncovered hundreds of cases of children who spied for the secret police - informing on adults for listening to foreign radio stations or telling jokes about the Ceaucescu family. When it came to recruitment, the Securitate, it seems, used a carrot and stick approach. Sometimes they would offer a place at university as a reward for collaboration. But there were several cases where pupils were approached in school after getting into trouble and offered a way out. Details of the extent of the operation remain sketchy. It's also unclear if it was deemed a success. But the revelations have stirred a nationwide debate in a country still coming to terms with its communist past. Rob Cameron, BBC News

Sweden May Have Illegally Deported Iraqi Refugees

2010-1-21 14:05:07

Sweden May Have Illegally Deported Iraqi Refugees Stockholm (AINA) -- Kalle Larsson, member of the Swedish Parliament for the Left Party and Spokesman on migration and refugees, has called for an investigation of Tobias Billström, Swedish Minister of Migration, following allegations that Iraqi refugees were illegally deported to Iraq. The allegations were detailed in a series of reports for Swedish Public Radio's news program Ekot by award winning investigative journalist Nuri Kino and his colleague Susan Ritzén.

Sweden May Have Illegally Deported Iraqi Refugees

2010-1-21 14:04:59

tsunami

2010-1-7 9:16:38

Tsunami: 5 Years after Since the 2004 Indian Ocean tsunami, Plan has worked side by side with children and their families to rebuild lives, communities and futures. We empowered young people to take active roles in their recovery and put children at the heart of our response.

international news

2010-1-2 9:55:14

This comprehensive and easy to read document sets out for the first time the complex legislative arrangements that are currently in force in the UK permitting unlicensed herbal remedies to be supplied to individual patients following a face-to-face consultation. It is a truly consultative document and the MHRA have confirmed that further consultation will follow on more specific issues once the responses to MLX 299 have been evaluated. The proposals are in response to the recommendations of:the House of Lords Report of November 2000 on Complementary & Alternative Medicine (CAM); and the Report of September 2003 of the Herbal Medicine Regulatory Working Group (HMRWG) which was set up as a result of the Lord's Report.

Aides to Iran’s Opposition Leaders Said to Be Arrested

2009-12-29 9:28:24

By ROBERT F. WORTH Published: December 28, 2009 BEIRUT, Lebanon — A day after violent protests rocked cities across Iran, the authorities arrested at least a dozen opposition figures on Monday, including former Foreign Minister Ibrahim Yazdi, the human rights activist Emad Baghi and three top aides to the former presidential candidate Mir Hussein Moussavi, Iranian news sites reported. Skip to next paragraph Enlarge This Image Reuters Iranian protesters attacked police officers during clashes on Sunday in Tehran, where five people reportedly were killed. More Photos » Multimedia Photographs Violence in Iran Related The Lede: Iran's Opposition Wields Stones and Cameras Times Topics: Iran Enlarge This Image Reuters Protesters in Tehran hurled rocks at the police and set their motorbikes on fire. More Photos > NYT_VideoPlayerStart( { playerType : "article", videoId : "1247466294806" } ); Readers' Comments Share your thoughts. Post a Comment » Read All Comments (54) » All told, more than 1,500 people have been arrested nationwide since Sunday, including 1,110 in Tehran and 400 in the central Iranian city of Isfahan, the pro-opposition Jaras Web site reported. In Hawaii, where he is on vacation, President Obama condemned the violence against protesters and called for the release of those “unjustly detained.” “For months, the Iranian people have sought nothing more than to exercise their universal rights,” Mr. Obama told reporters. “Each time they have done so, they have been met with the iron fist of brutality, even on solemn occasions and holy days.” He added that the protests in Iran have nothing to do with the United States or other foreign countries. “It’s about the Iranian people, and their aspirations for justice, and a better life for themselves,” he said. “And the decision of Iran’s leaders to govern through fear and tyranny will not succeed in making those aspirations go away.” The streets of Tehran were largely quiet on Monday, as citizens absorbed the shock of the previous day’s violence. Thirteen people were reported to have been killed and many more wounded in street battles in cities across the country between security forces and protesters, who fought back more fiercely than ever before. The government said Monday that eight people had been killed in Tehran, and opposition Web sites catalogued five deaths in other cities. The government said that it was holding the bodies of five dead protesters, including the nephew of Mr. Moussavi, in what appeared be an attempt to prevent funerals that could turn into more demonstrations, the state-run news IRNA news agency reported. The bodies were being held pending autopsies. The authorities’ use of deadly force on the Ashura holiday drew a fierce rebuke on Monday from the opposition cleric and reformist candidate Mehdi Karroubi, who noted that even the shah had honored the holiday’s ban on violence. “What has happened to this religious system that it orders the killing of innocent people during the holy day of Ashura?” Mr. Karroubi said in a statement, according to the Jaras Web site. Mr. Karroubi, a fierce critic of the government, was attacked Sunday by plainclothes security officers, and other attackers later smashed the front windshield of his car, the Sahamnews Web site reported. Government supporters blamed the opposition for the violence and called for their prosecution. The Revolutionary Guards issued a statement calling violence by the protesters a “horrible insult to Ashura” and called for “firm punishment of those behind this obvious insult,” the semiofficial Fars news agency reported. Large groups of police officers stood guard in several central Tehran squares on Monday morning, witnesses said. At least three subway stations were closed, apparently to prevent any further gatherings. Still, there were reports of continuing scattered protests on Monday in Tehran’s Haft-e-Tir square and other areas, Jaras reported. The police fired tear gas to disperse a group of mourners who gathered outside the Tehran hospital where the body of Mr. Moussavi’s nephew, Ali Moussavi, had been held, the Nowrooz Web site reported. A prominent opposition figure with ties to the Moussavi family said Ali Moussavi had been killed by assassins. Family members said Mr. Moussavi’s body disappeared from the hospital overnight, and on Monday IRNA reported that his body and four others were being held while investigations were carried out. A 27-year-old journalist who was reporting on the street clashes on Sunday was reported missing. The reporter, Redha al-Basha, who was working for Dubai TV, has not been heard from, according to a statement issued by Dubai TV. Mr. Basha was last seen surrounded by security forces in Tehran, witnesses said. The group Human Rights Activists in Iran said that the 1,100 people arrested in Tehran were being held in Evin Prison, the Gooya Web site reported. Among those arrested in Isfahan was the son of a senior cleric, Ayatollah Jalaleddin Taheri. Ayatollah Taheri is the former Isfahan representative of Iran’s supreme leader, Ayatollah Ali Khamenei, and his son Muhammad is married to the granddaughter of Ayatollah Ruhollah Khomeini, the father of Iran’s 1979 revolution. Ayatollah Taheri tried last week to lead a memorial service for the dissident cleric Grand Ayatollah Hossein Ali Montazeri, who died Dec. 20. The arrest of his son was viewed as an effort by the authorities to pressure the ayatollah. Nazila Fathi contributed reporting from Toronto, and Peter Baker from Honolulu.

Aides to Iran’s Opposition Leaders Said to Be Arrested

2009-12-29 9:28:08

Ex-Aides’ Scandal Nags Japan’s Leader

2009-12-25 9:22:27

Franck Robichon/European Pressphoto Agency Prime Minister Yukio Hatoyama apologized Thursday at a news conference in Tokyo after two former aides were indicted. Mr. Hatoyama said he had done nothing wrong personally. function getSharePasskey() { return 'ex=1419397200&en=6905bb8b6137c068&ei=5124';} function getShareURL() { return encodeURIComponent('http://www.nytimes.com/2009/12/25/world/asia/25japan.html'); } function getShareHeadline() { return encodeURIComponent('Ex-Aides’ Scandal Nags Japan’s Leader'); } function getShareDescription() { return encodeURIComponent('Two former aides were indicted on charges of falsely reporting campaign donations, forcing Prime Minister Yukio Hatoyama to make a televised apology over the type of corruption he has pledged to end.'); } function getShareKeywords() { return encodeURIComponent('Politics and Government,Japan,Yukio Hatoyama'); } function getShareSection() { return encodeURIComponent('world'); } function getShareSectionDisplay() { return encodeURIComponent('International / Asia Pacific'); } function getShareSubSection() { return encodeURIComponent('asia'); } function getShareByline() { return encodeURIComponent('By HIROKO TABUCHI'); } function getSharePubdate() { return encodeURIComponent('December 25, 2009'); } TOKYO — A campaign finance scandal that has nagged at Japan’s new prime minister deepened Thursday with the indictment of two former aides accused of falsely reporting donations, forcing him to make a televised apology over the type of corruption he has pledged to end. But the prime minister, Yukio Hatoyama, who has been in office for only three months, said he had no intention of resigning. He said he had done nothing wrong himself and had been unaware of any transgressions by his aides. Opposition politicians said his assertions mocked the intelligence of taxpayers and his own supporters. The latest development in the scandal could further erode the credibility of Mr. Hatoyama’s government, which took power in September on promises of wide-ranging reforms after a half-century of almost uninterrupted single-party rule. His term in office already has been mired by policy missteps and backtracking on some of his main pledges. Prosecutors said in a statement that they had charged the two former aides of Mr. Hatoyama, Keiji Katsuba, 59, and Daisuke Haga, 55, with false reporting of almost 400 million yen in donations, roughly $4.4 million. The two, who resigned after the scandal first broke a few months ago, are accused of listing contributions in the names of dead people and underreporting some donations. Prosecutors said Mr. Hatoyama, who leads the Democratic Party, would not face any charges. “I feel a deep responsibility,” Mr. Hatoyama said, bowing deeply at the nationally televised news conference. “If there is an overwhelming call for Hatoyama to resign, then I will respect that. But I cannot throw out all we have achieved.” The scandal had at first appeared to raise few anxieties among voters because much of the dubious money was in the form of donations from Mr. Hatoyama’s own coffers or his mother, an heiress to the fortune of the Japanese tire maker Bridgestone. But the charges have increasingly painted Mr. Hatoyama as a leader out of touch with the economic plight of average Japanese, which has worsened sharply in the aftermath of the country’s worst recession since World War II. By highlighting Mr. Hatoyama’s privileged lineage, the scandal has also hurt his reputation as a reformer. His grandfather was a prime minister in the 1950s who helped found the long-governing Liberal Democratic Party that Mr. Hatoyama ultimately cast from power. The prime minister’s brother remains a prominent lawmaker for the Liberal Democrats. Mr. Hatoyama acknowledged receiving 15 million yen (about $164,000) per month in political contributions from his mother, and said he would pay back taxes and penalties, dating back to 2002, of more than 600 million yen ($6.5 million). The Liberal Democratic leader, Sadakazu Tanigaki, urged the prime minister to resign. “This makes a mockery of hardworking taxpayers,” Mr. Tanigaki said on the public broadcaster NHK. “He should immediately take political responsibility.” There has been no suggestion that the dubious campaign finance reporting approaches the scope or seriousness of past scandals, which occurred regularly under the Liberal Democrats, often involving secret payments from corporate interests trying to gain advantages in public works projects and government contracts. But Mr. Hatoyama had promised to end such payments, an important reason that Japanese voters ousted the Liberal Democrats from power. Mr. Hatoyama has already come under fire in recent weeks for flip-flopping on whether to renegotiate a deal to relocate an American military air base, and for reneging on a campaign pledge to eliminate an unpopular gasoline tax. His government’s lack of progress in trimming huge budget deficits and curbing deflation has also hurt Mr. Hatoyama’s standing. Most voters had appeared to be willing to give Mr. Hatoyama time to deliver on his promises, which include an ambitious increase in spending to support families with small children. But polls show that public support for Mr. Hatoyama is declining. Public opinion polls in Japan recently showed his approval rating had fallen below 50 percent from a postelection high of 71 percent. The falling support puts the Democrats in a potentially precarious position ahead of elections for Parliament’s upper house, which must be held next year. The Democrats hope to clinch a majority in that chamber to match their control of Parliament’s powerful lower house.

International News

2009-12-15 10:13:22

International News ITALY Co-generation for paper plant A range of equipment, including substations for connection to the grid, worth around EUR 8 million, is to be supplied by ABB for a new cogeneration combined cycle plant serving Italian paper manufacturing company, Cartiere del Garda. The plant is expected to achieve an 86 per cent efficiency when it comes into service in the summer of 2008. MOLDOVA Advanced management for national network ABB is to supply a state-of-the-art SCADA/EMS network management system for monitoring and control of the Moldovian national power grid. The US$15 million turnkey project will include remote data acquisition, telecommunications and metering systems. The project for Modelectrica will be completed in late 2009. GERMANY High efficiency coal-fired power station The entire electrical and automation package for the first coal-fired power station to be built in Germany in 11 years will be supplied by ABB. The company’s Boilermax system will optimise start-up and shut-down procedures. Together with the sophisticated Modakond control process this will help achieve a net efficiency of 45 per cent, making it the most efficient plant of its type in the country. VENEZUELA Cross-country power connection for industry A US$36 million contract to strengthen the power grid connecting hydropower from the south-east of the country with the oil and other industries in the northwest has been won by ABB. The project for CVG Electricificaion del Caroni includes two 800kV substations, ABB’s first, with further additional work involving the construction of connection feeders to connect a 800/230kV power transformer which will be ordered separately. NORWAY Boosting power in the central region Statnett, Norway’s transmission operator, has placed a US$35 million order with ABB for a FACTS (flexible alternating current transmission system) to bring more power to the country’s central region, on what is already a heavily-loaded grid. The contract includes two SVC (static var compensator) units to provide reactive power compensation.

London, England (CNN)

2009-12-5 8:58:48

-- Where can you find Daniel Day-Lewis, Sophia Loren, Nicole Kidman, Penelope Cruz, Judi Dench, Marion Cotillard, Kate Hudson and Fergie from the Black Eyed Peas all having a blast singing and dancing together? In Rob Marshall's new Italy-drenched musical, "Nine," opening in theatres December 18, with what has to be the most star-studded cast ever to grace a musical. The new singing-and-dancing extravaganza by the director of the Academy Award-winning "Chicago" is the story of Italian film director Guido Contini, played by Day-Lewis. Contini is in the throes of a mid-life crisis that has stifled his creative juices but ramped up his romantic entanglements in early 1960s Venice. Sophia Loren plays Day-Lewis' mother; Marion Cotillard his wife and the other stars his various love interests. The story is based on an adaptation of Federico Fellini's autobiographical film, "8½." Asked how he persuaded so many super-star leading ladies to play supporting parts in his new film, Marshall said he was "astonished" that they all wanted to take part. We all knew how special it was --Rob Marshall, director "I think it's because a musical is special, as it rarely happens," the director told CNN. "And when it does, people who have a natural skill want to do it." var currExpandable = "expand1"; var currExpandableHeight = 360; Video: All-star cast of 'Nine' var mediaObj = new Object(); mediaObj.type = 'video'; mediaObj.contentId = ''; mediaObj.source = '/video/showbiz/2009/11/25/nat.nine.preview.cnn'; mediaObj.source = mediaObj.source.replace('/video/',''); mediaObj.lgImage = $(currExpandable).select('img.box-image')[0].readAttribute('src'); mediaObj.lgImageX = 640; mediaObj.lgImageY = currExpandableHeight; mediaObj.origImageX = $(currExpandable).select('img.box-image')[0].readAttribute('width'); mediaObj.origImageY = $(currExpandable).select('img.box-image')[0].readAttribute('height'); mediaObj.contentType = 'Video'; CNN.expElements.expand1Store = mediaObj; var currExpandable = "expand2"; var currExpandableHeight = 360; Video: 'Nine' debuts in London var mediaObj = new Object(); mediaObj.type = 'video'; mediaObj.contentId = ''; mediaObj.source = '/video/showbiz/2009/12/04/curry.uk.nine.premiere.itn'; mediaObj.source = mediaObj.source.replace('/video/',''); mediaObj.lgImage = $(currExpandable).select('img.box-image')[0].readAttribute('src'); mediaObj.lgImageX = 640; mediaObj.lgImageY = currExpandableHeight; mediaObj.origImageX = $(currExpandable).select('img.box-image')[0].readAttribute('width'); mediaObj.origImageY = $(currExpandable).select('img.box-image')[0].readAttribute('height'); mediaObj.contentType = 'Video'; CNN.expElements.expand2Store = mediaObj; "We all knew how special it was." Marshall said that occasionally during filming, he had to "pinch" himself "because there's Sophia Loren, Judi Dench and Daniel Day-Lewis, the greatest actors in the world. I was overwhelmed each day working with them. That never really went away." Asked how and why he came to cast Day-Lewis as the leading man in a musical, Marshall said of the actor: "He likes challenges, and he wants to transform himself into parts and become people." Marshall said singing and dancing came naturally to Day-Lewis, much more known for dark, dramatic roles. "We had a short amount of time once we cast him, but he just went to work and kept working on the voice, the movement." "He is just a director's dream," Marshall said about the award-winning actor, "because not only is he such a consummate artist and worker, but he's also wonderful to work with."

CANTON FAIR 2009

2009-10-6 4:37:32

THE 106TH CANTON FAIR WILL BE OPEN FORM OCTO 15-20,PLEASEWELCOME TO OUR BOOTH,OUR BOOTH NO.:1.1H31.PLEASE COME ,AND HAVE A GOOD BEGINING.TKS

ASIA TODAY

2009-9-9 2:03:51

Thailand didn't escape the effects of the global economic downturn. And with more Thais opting to stay home instead of heading to the movies, the country's soap opera industry is getting an unexpected boost. It takes talented actors to make this fight scene look natural and compelling. The stars of this action-style Thai soap opera rehearsed for hours to make it appear flawless. Across Thailand, millions of fans will tune in to watch the latest twist in what is one of the country's most popular shows, known as "Rook Kar" or "Brave Man Standing: Checkmate." Soap operas are big business in Thailand - more than 50 are currently produced in the country. The best-loved dramas are beamed into living rooms across the country every day before and after the evening news. The Bangkok Broadcasting and Television Company produces dozens of soaps. Story concepts and business decisions are made at its headquarters in Bangkok. Some of its most successful soaps feature martial arts, love affairs and stories of everyday people defeating their enemies. The themes resonate with millions of Thais. Surang Prempree, Managing Director, Bangkok Broadcasting & Television Co., said, "The current economic downturn is not having a negative effect on the production of Thai soap operas. We must actually increase our investment because people will be staying at home and watching soap operas more often. People don't have to pay additional money to watch soaps." Although the plots and performances are often melodramatic and the effects sometimes unoriginal, the creators of Thai soaps created a model that keeps countless people tuned in night after night.

China Orders Environmental Evaluation on Projects

2009-8-22 4:41:42

China on Friday published a regulation to enforce environmental evaluation on new projects from October, in an effort to prevent pollution or ecological destruction from the beginning. According to the regulation, approved on Aug. 12 by the State Council, the Cabinet, environmental evaluations are required before the planning of development projects being approved. Under the regulation, environmental evaluation of city-level projects will be conducted by local environmental authorities while provincial projects must be evaluated by environmental authorities under the State Council. The regulation covers all development activities, from land use and the development of rivers or oceans, to development projects related to industrial, agricultural, husbandry, and forestry sectors as well as energy, water conservation, transportation, urban construction, tourism, and exploration of natural resources